By Ali Turner, content writer, S-5!
The total costs for installing a solar photovoltaic (PV) system on a roof varies depending on system design and engineering, solar panels, the inverter, monitoring equipment, logistics, mounting hardware and labor. Extra costs, such as permits and inspections, also contribute to the total price.
Gealed hardware costs compared to the entire system can only make up 5-7% of the final costs, but they must be carefully considered because they also influence work, freight, equipment and other logistics costs in the overall analysis. The larger perspective is that if you can reduce time by 20% or more, 20% more jobs can be completed. This increases sales in the same way and leads to a boost in winning.
You may wonder how you can save costs and save time on your projects. A way is to one Raill -free confirmation solution For every metal roof project. Over the years, railless assembly methods for metal roofs have become increasingly popular, and it is Easy to see why.
Advantages of railless systems
Systemless systems are much lighter than traditional rammed systems, which helps to lower your rack costs. A high -quality, correctly manipulated railloos mounting system can weigh 85% less than most rammed alternatives. Given a saving of 85% in assembly transport and much lower freight transport, the CO2 footprint and the environmental impact of a project are greatly reduced.
When installing PV panels, this type of weight reduction can be crucial to stay within the budget and within the permitted added limits of colland load of the building structure. Rail solutions can lower shipping and transport costs by a maximum of 60%, while the need for equipment is also minimized to load, load and load materials at the work location.
Rail solutions are praised, with only three components instead of 10 or more for praised systems, so there are fewer parts to manage from start to finish. Plus, as soon as installers have the “lay-and-play” method under the knee, a module installation takes only about 90 seconds each.
PVKIT® Railless sunburn
The S-5! PVKIT solution is a railless, Directattach ™ sunscreen mounting for standing seam and metal roofs with exposed measurements. The use of the integrated “rails” of the roof makes mounting solar energy with the PVKIT quickly and efficiently. This method also reduces the weight of the mounting system and offers 25% better tax distribution, using fewer components.
Raillate installations use the integrated “rails” of a metal roof
The PVKIT is compatible with all S-5! Clamps and can be used with almost every S-5! Mounting bracket. This cost -effective, lightweight alternative to traditional rails -based mounting can save time and money with your next project.
PVKIT
With a total system weight that is much lower than that of a rammed system, a Railloos system offers considerable savings in transport costs. Components for a 50 kW system are even compact enough to fit in the trunk of your car.
Don’t believe us? Watch this video From a full 50 kW system on hard good in a passenger car.
Raillate installations require much less space than praise systems
Once the S-5! PVKIT arrives at the work location, it is easy to handle, because Directattach components are regularly worn in a backpack or bucket to the roof. Both large and small-scale operations benefit from the labor and transport savings that are accompanied by choosing a rail attachment solution.
Ideas to hold
PV systems on solar energy are an important source of energy generation and can significantly improve the value of your property. There are different cost -saving methods to consider, such as selecting a Raill -free confirmation solutionthat can lower the total project costs.
See how much you can save on your next metal roofing Solar project by visiting our Metal roof project calculator Or send us a message at support@s-5.com.
Register for S-5 University To better understand which solution for solar energy, snow or utility you should use.
About S-5!
Founded by an experienced metal Dakexpert, S-5! is the leading authority in the field of metal roof solutions since 1992. S-5! The zero penetration clamps and lifelong brackets attach other products to standing seam and metal roofs with exposed metal roofs, while retaining the roof integrity and guarantees. Made in the US, S-5! Solutions are designed for a variety of applications mounted on roof and are now installed on more than 2.5 million metal roofs worldwide, including 9 GW solar sun, which has never seen strength and a long service life before. For more information, visit www.s-5.com.
Sponsored content by S-5!
Comments are closed.