12 bathroom remodeling mistakes to avoid when planning your design
Bathroom remodeling mistakes can derail the best-laid plans. Creating a new bathroom is an exciting project, and one that you want to get right the first time so you don’t jeopardize your room schedule or end up spending more than you intended to fix mistakes.
To keep your bathroom renovation project running smoothly, we asked the experts which traps homeowners fall into most often. With their know-how, you can create the bathroom you crave without encountering costly drawbacks…
1. Going over budget
- 1 1. Going over budget
- 2 2. Not being able to compare estimates properly
- 3 3. Stuffing too much in
- 4 4. Neglect of ventilation requirements
- 5 5. Not paying attention to the rules for lighting
- 6 6. Skimp on Storage
- 7 7. Letting water out of the shower
- 8 8. Ignoring Your Water System
- 9 9. Don’t select shower control on time
- 10 10. Forgetting light levels should be adjustable
- 11 11. Choosing the Wrong Paint
- 12 12. Putting Fittings in the Wrong Position
To avoid going over budget, proper research into the cost of bathroom remodeling is a must. “Most homeowners don’t do enough research on the different brands and product types to judge the combination of what they like and what they can afford,” said John Bodrozic, co-founder of HomeZada. “Price points for plumbing, tile, vanities, light fixtures, etc. vary widely by brand and type of material.”
Also, don’t forget that a bathroom renovation can involve unforeseen expenses. “As a general rule of thumb, once you get your quote for your bathroom, add 20 percent to your budget as a contingency,” advises. PlumbNation.
2. Not being able to compare estimates properly
When getting estimates for a remodel, it’s tempting to go for the cheapest, but this shouldn’t be the only criterion for your choice, and you should also make sure you compare the details accurately.
“Don’t let price be the only factor when hiring a contractor,” says Joy Harris of construction/remodeling company Cedar Grove Maintenance. ‘Ask your friends and family for recommendations, see how long they’ve been in business, check their online reviews and trust your gut. If you like the contractor, you’ll have a better experience and sometimes that means you’ll pay a little more.
“If the estimates you receive are very different, look at the details – sometimes someone has accidentally left out something from their estimate, which would be the reason for the price difference. We recommend using a spreadsheet to compare your estimates.”
3. Stuffing too much in
Yes, it’s tempting to opt for any fixture and fitting that will make all your bathroom dream ideas come true, but you need to consider the size of the room.
“Unfortunately, I’ve seen a lot of bathroom renovations where the homeowner tried to cram too much into the space,” says real estate agent Trey Van Tuyl of Discover Houses Miami. “Not only does this risk breaking building codes, but it can also make the bathroom uncomfortable to use.”
Also consider the dimensions of each of the individual elements you include in the room. A common mistake is choosing plumbing and amenities that are too large for the space, the experts at PlumNation warn.
4. Neglect of ventilation requirements
A bathroom is a humid environment and therefore it is essential to ensure adequate ventilation. Real estate agent Trey Van Tuyl has seen many customers make a mistake when choosing the extractor fan.
“It’s very important to choose a fan that’s big enough for the room, as humidity can be trapped and can lead to mold and mildew over time,” he explains.
Remember that mold and mildew are not only unsightly and spoil the look of your room, but they can also affect the health of the entire family. Always check the specifications of the fan to make sure it is suitable for your bathroom.
Also keep in mind that exhaust fans can be noisy. “Choose a fan that can move a lot of air and is very quiet at the same time,” advises Erin Davis, chief designer at Mosaik Design & Renovation.
5. Not paying attention to the rules for lighting
Bathroom remodeling mistakes include those involving lighting: You should be aware of the proximity of lights to certain bathroom fixtures.
“Lighting, especially over bathtubs, can be provided, but the rules are very specific,” explains Ben Kolo, owner of Mr Electric from Central Iowa. The National Fire Protection Association (NFPA) writes the National Electric Code (NEC) electrical code. This topic describes how far the light should be from tubs and where to install them. An electrician knows those rules and can best serve you with lighting updates for your bathroom. AFCI (arc fault circuit interrupter) protected is required on all new lighting installed in bathrooms.”
In the UK, regulations apply to the type of light you can use in the room, called bathroom lighting zones, and a registered electrician can advise you.
6. Skimp on Storage
Clutter in the bathroom can jeopardize the results of a remodel, so make sure you build plenty of bathroom storage ideas into the design from the start.
“There are only so many ways to add storage space afterwards before it gets too cluttered to enjoy,” said Sarah Gaffney, director of design and development for Design next phase. “Invest in built-in shelving, sinks and linen closets and custom shower niches. If you have the help of a remodeling company, they can tell you which options are best for your home based on past experience.”
7. Letting water out of the shower
If you want to keep your brand new bathroom in top condition in the long term, pay close attention to the shower tiling.
“How many times have I seen showers that don’t hold the water in the shower,” says Ezra Laniado, owner of the Los Angeles-based Monumental construction crew. “If you are installing tile from a new shower, you should tilt the tile slightly inward on top of the surrounding curb (not level) so that all the water in the shower drains and no water leaks out of the shower through openings (such as under the door, etc). Messing up this little detail will not only be very annoying, but the bathroom will also become more susceptible to water damage and spoilage over time.”
8. Ignoring Your Water System
Here’s one of the mistakes in bathroom remodeling that can lead to acute disappointment: a shower that isn’t as powerful as you planned.
“Make sure you have the right faucet and shower heads for your water system,” said Craig Russell, founder and CEO of The English Contractor in Cincinnati, Ohio. “Your water source, pipe size, shower system and shower heads all have to work together. A wrong piece can affect your water pressure.’
9. Don’t select shower control on time
And while we’re on the subject of showers, it’s important to share your plans with your plumber ahead of time.
‘A common planning mistake that can end up being quite costly to correct is not choosing your shower controls’ before the plumbing work is completed,” explains Melissa Michaud, co-owner and design consultant at Solidly built contract and design.
“If your plumber doesn’t know you have big plans for a glorious rain shower head popping out of your ceiling, plus a hand-held sprayer on a slider, and maybe even a few sprays for the body, you could end up with basic rough — in plumbing that just one. fixed shower head, leaving you with two options: drop your plans for a spa-like oasis, or pay hundreds of dollars for a renovation.”
10. Forgetting light levels should be adjustable
There are times of the day when you need improved bathroom lighting ideas to provide enough lighting for the users of the room to safely and accurately perform tasks such as applying makeup, shaving, and so on. But this will not always be the case.
“Lighting should be customizable,” recommends Eric Nerhood, owner and president of First-class real estate buyers. ‘Too dark and you can’t see it. Too bright and you can’t just relax in the room.’
11. Choosing the Wrong Paint
For decoration that will last in the humid atmosphere of a bathroom, follow the suggestion of Andre Kazi, CEO of improve.
“People often make the mistake of using regular paint when remodeling their bathroom and forget that the shower often causes your walls to get wet,” he explains. “Use mold and mildew resistant paint instead to prevent deterioration.
You should also use an oil-based primer before repainting your bathroom. This helps to cover up any stains and ensures an even base.’
12. Putting Fittings in the Wrong Position
One of the mistakes in bathroom remodeling Randy Jones, owner and operator of Nice renovation, a construction company in Northern Delaware, often sees the wrong placement of wall hardware.
“Towel bars and accessories should be attached to a frame, not drywall, where they are pulled out of the wall after the first tug of the towel,” he explains.
Also think about where you want to hang mirrors. “The height of the mirror should be tailored to the needs of the customer, not the installer,” he says.